Special Effect Prints

Metallic Puff Prints

Metallic Puff prints combine a raised surface with a metallic finish for a premium, high-impact look. Perfect for standout branding and statement pieces, they add shimmer, texture, and long-lasting visual appeal.

Turnaround time: 2-3 business days.

We do not accept Gang sheets for this product.
We do not take Rush Orders for this product.

No Minimums
Heat Press Application
Ready in 2-3 Days
50+ Wash Tested
Bulk Order Discounts
Soft Puffy Look & Feel
Wholesale pricing available
$0.00
- +
View details

Metallic Puff Prints Heat Pressing Instructions

Step 1 - Prepare Your Apparel:

  • Set your heat press to medium to high pressure.
  • Press the fabric at 310-320°F (154-160°C) for 4-5 seconds to remove any moisture.
  • Ensure the fabric is clean, flat, and free of wrinkles.

Step 2 - Position the Design:

Carefully place the Metallic Puff print on your apparel in the desired position. Use a t-shirt ruler for precise alignment.

Step 3 - First Press:

● Close the heat press or apply medium to firm pressure with an iron.
● Press at 300-310°F for 8 seconds with 30-40 psi pressure.
Note: Always perform a test press to determine the correct temperature and time, as settings may vary based on fabric type and equipment.

Step 4 - Peel Off:

Carefully and smoothly remove the carrier sheet to reveal your stunning Metallic Puff print once it cools down.

Step 5 - Second Press:

  • Apply direct pressure on the transfer without any additional layers.
  • Heat press at 300-310°F for an additional 5-10 seconds to ensure maximum adhesion and durability.

Step 6 - Post-Press Care:

Wait 24 hours before washing. For best results and longevity, wash the garment inside out in cold water, use mild detergent, avoid bleach, and tumble dry on low heat. Avoid direct heat on the vinyl.

FAQ's

What is metallic printing?

Metallic printing is a specialty print technique that uses metallic inks or foils to create a shiny, reflective finish, often combined with puff additives to give a raised, textured effect.

How durable are metallic prints?

Metallic prints are durable when properly heat-applied and cured, maintaining their shine and texture through regular wear and washing with proper care.

What is the production timeline for Metallic Transfers?

Production timelines vary by order size and design complexity but typically range from a few working days after artwork approval.

Is there a minimum order requirement for Metallic Transfers?

Minimum order requirements depend on the design and production setup; bulk orders are recommended for best consistency and cost efficiency.

Are there specific washing instructions for garments with Metallic Transfers?

Yes, garments should be washed inside out in cold water and air-dried or tumble-dried on low heat to preserve the metallic finish.

Can Metallic Transfers be applied using an Easy Press or a regular iron?

For best results, a professional heat press is recommended; Easy Presses may work for small applications, while regular irons are not advised due to uneven heat and pressure.