Silicon Raised Prints

No minimum order is required. No setup fees.

How to get best results
  • Ensure your files are either in .AI, .PDF, .PNG, .EPS, .SVG, .TIF, or .PSD.
  • A Minimum 300 dpi is recommended for printing. The Higher the dpi, the better color vibrance and detailing.
  • We can automatically detect your design size. In case you want a custom size - Mention the size of a design file by width and height without the empty space around the design in the artboard.
  • Make sure there are no transparent pixels in the design.
  • Please note that all files are printed as uploaded.
  • No Gang Sheets orders for Special Prints.
  • We do not accept intricate Designs for special prints.
  • Available in 2 colors
  • Ready in 48-72 Hours
  • 50+ Wash tested
$0.00

  • File format accepted: .AI, .PDF, .PNG, .SVG, JPG, JPEG.
  • Minimum 300 dpi. Higher dpi is for better color vibrancy and definition.
  • Mention the size of a design file by width and height without the empty space around the design in the artboard.
  • Ensure there are no transparent pixels in the design.
  • All files are printed as uploaded.
  • Your orders are ready within 48-72 hours.
  • In case you need multiple orders shipped together at one shipping charge.
  • Please place them within the same day before they are scheduled for shipment.
  • We ship for free for orders over $250.
  • No Hidden Fees, No Minimum Order
  • If your artwork doesn't match the size asked to print. We will only go by the width of the artwork. No refunds will be offered for smaller prints. Extra charges applicable for bigger sizes than paid for.
  • Exact color matching is not provided.
  • No change would be made to any order 4 hours after placing it.
  • Please read the artwork instructions properly before uploading.
  • Click on the “Drag and Drop your Files” button to upload your design.
  • Choose the size you want your artwork or proceed with the detected size.
  • Select the quantity you need.
  • Select add to cart to browse more and add more products/designs or select “Buy with Shop Pay” to place the order.

Heat Pressing Instructions.

Step 1 – Remove Moisture from the Apparel.

Set the pressure between Medium to High and press. Ensure the fabric is clean and flat. Use a lint roller to remove any debris and make sure it is free of wrinkles. Then heat press the fabric at

  • Temperature – 310-320F
  • Time – 4-5 seconds

Check if moisture is removed completely, if not, repeat previous step until done.

Step 2 – Set your press

Place the vinyl on the fabric in the desired position. Use a t-shirt ruler for accurate alignment. Close the heat press or iron, apply medium to firm pressure, and press at around

  • Temperature – 300-310F
  • Time – 10 seconds
  • Pressure - 30-40 psi

The temperature may vary based on apparel, cloth and other conditions. Make sure to test the right temperature and time before proceeding.

Step 3 – Peel Off

Gently peel off the carrier sheet, this will reveal the raised 3D effect of the design

Step 4 – Second Press

Press Directly on the transfer without covering it with any layer.

  • Temperature – 310-320F
  • Time – 3-5 seconds
Step 5 – Post-Press Care

Wait 24 hours before washing the fabric inside out in cold water. Remember to tumble dry on low heat and avoid direct heat on the vinyl to maintain the quality of the puff prints

About Silicon Prints

What are Silicon Prints made of?

Silicon Prints are screen-printed heat transfers made with premium silicone-based materials. This gives them their raised, matte finish and durable quality.

Can I customize the colors of Silicon Prints?

Currently, Silicon Prints are available in five stock colors: Red, Dark Navy, White, Dark Gray, and Black. Pantone color matching is not available.

What is the minimum order quantity for Silicon Prints?

There are no minimum orders for Silicon Prints

What types of designs are best for Silicon Prints?

They work best for 1-color designs like logos, text, and icons to create a luxurious and professional look.

What kind of garments can I use Silicon Prints on?

They’re versatile and adhere perfectly to any fabric color, making them suitable for a wide range of materials, including cotton, polyester, and blends.

Do I need any special tools to apply Silicon Prints?

Yes, you’ll need a heat press machine set to the appropriate temperature, pressure, and time for proper application. Hand irons are not recommended for professional results.